Removing An Fbu - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

Expansion cards and backup units
Figure 190: Installing the FBU with the FBU holder
▶ Insert the FBU with the holder and slide in direction of the arrow until the
FBU holder engages (see circle).
▶ Install the RAID controller, see
Concluding steps
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
The recalibration of the FBU starts automatically, and finishes within a
few minutes.
▶ If applicable,
"Installing the front cover with lock" on page
9.10.3

Removing an FBU

Upgrade and Repair Unit
(URU)
326
"Installing an expansion card" on page
59.
65.
71.
Upgrade and Maintenance Manual
71.
Hardware: 15 minutes
269.
RX2540 M7