Disconnecting The Fbu Adapter Cable From The Tfm; Removing The Fbu Holder From The Chassis; Concluding Steps - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Expansion cards and backup units
9.5.4.3

Disconnecting the FBU adapter cable from the TFM

Figure 165: Disconnecting the FBU adapter cable from the TFM
Ê Disconnect the FBU adapter cable from the TFM.
9.5.4.4

Removing the FBU holder from the chassis

Ê Remove the FBU holder from the chassis as described in section
the BBU with the BBU holder" on page
9.5.4.5

Concluding steps

Ê Perform the following procedures:
1. "Closing the server" on page 66
2. "Installing the server in the rack" on page 68
3. "Switching on the server" on page 72
4. "Closing the rack door" on page 73
256 Upgrade and Maintenance Manual
251.
"Removing
RX100 S7