Network Blf Data Transfer [9-2] - Panasonic KX-TDA100 Features Manual

Programming Guide References
None
Feature Guide References
1.27.1.2 PBX Code Method (Access with PBX Code)
1.27.1.3 Extension Number Method (Access without PBX Code)
Trunk Group—Priority 1–Priority 8
Specifies the CO line group to be used for TIE line calls for each priority.
Default
None
Value Range
None, 1–64
Programming Guide References
None
Feature Guide References
1.27.1.2 PBX Code Method (Access with PBX Code)
1.27.1.3 Extension Number Method (Access without PBX Code)

4.15.2 Network BLF Data Transfer [9-2]

Settings related to the transmission of extension BLF (Busy Line Field) data over a network of PBXs can be
programmed. This data is used to show the status of a monitored extension attached to another PBX on a
Network DSS button.
Network BLF(DSS) Data Transfer for VoIP->ISDN
Selects whether to re-send BLF data received from a VoIP port through any ISDN ports that are set to
transmit BLF data.
Default
Disable
Value Range
Disable, Enable
Programming Guide References
4.7.19 PRI Port [1-6]—Networking Data Transfer
Feature Guide References
1.27.2.3 Network Direct Station Selection (NDSS) (KX-TDA0920 required)
4.15 Private Network [9]
Feature Guide 721