Panasonic KX-TDA100 Features Manual page 585

1.
Type the new extension number, then click Apply.
2.
Set the status of the extension port to "OUS", then "INS".
When changing the extension number, make sure that the extension port is not in use. If the extension
number is changed while the port is in use, the new extension number will not come into effect.
Default
Starting at 101 (For port 01 of the first extension card that is installed. Extension numbers are preset for
subsequent extensions by adding one to the previous extension number.)
Value Range
Max. 4 digits (consisting of 0–9)
Programming Guide References
4.7.24 Extension Port [1-8] Port Command
Feature Guide References
None
Extension Name
Specifies the name of the extension. As for the available characters, refer to the character code table
described in section 3.2.1 Installing and Starting KX-TDA Maintenance Console.
Default
Not stored.
Value Range
Max. 20 characters
Feature Guide References
None
Port Type
Indicates the extension port type (reference only).
Default
Current port type
Value Range
DPT: DPT port (DLC)
SLT: SLT port (SLC)
S-Hybrid: Super Hybrid port (DHLC)
S-Hybrid (SLT): XDP port of Super Hybrid port (DHLC)
S-Hybrid (S-DPT): Digital XDP port of Super Hybrid port (DHLC)
DPT (S-DPT): Digital XDP port of DPT port (DLC)
ISDN: ISDN port (PRI)
OPX: T1-OPX port (T1)
IP-EXT: IP-Extension port (IP-EXT)
4.10 Extension [4]
Feature Guide 585