Panasonic KX-TDA100 Features Manual page 724

4.15 Private Network [9]
The parameters on this screen can only be set when the Network PBX ID is set to 1 in the 4.15.1 TIE Table
[9-1] screen.
No.
Indicates the entry number (reference only).
Default
Not stored.
Value Range
1–32
Programming Guide References
None
Feature Guide References
1.27.2.3 Network Direct Station Selection (NDSS) (KX-TDA0920 required)
Network Extension No.
Specifies the number of the extension at another PBX that will be monitored. The number input here can be
in the form of an Other PBX Extension number, or a TIE number.
Default
Not stored.
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Programming Guide References
None
Feature Guide References
1.27 Networking Features—1.27.1 TIE Line Service
1.27.2.3 Network Direct Station Selection (NDSS) (KX-TDA0920 required)
Network Extension Name for Programming Reference
Specifies the name of the network extension. This name is only shown here, not on the displays of
extensions.
Default
Not stored.
Value Range
Max. 20 characters
724 Feature Guide