ON
Pattern 11
OFF
ON
Pattern 12
OFF
•
It is possible to leave a Message Waiting notification while hearing a ringback tone, busy tone, or DND
tone.
•
Message Waiting notifications are always left on the original extension. Message Waiting notifications
cannot be sent to a Call Forwarding (FWD) destination (→ 1.3.1.2 Call Forwarding (FWD)).
•
Both the calling extension and the called extension can cancel a notification after it has been left.
•
If a call is missed, the Message Waiting notification will be cleared when the called extension calls the
caller back and the call is answered.
•
Message Waiting Notification via Voice Mail DPT (Digital) Integration
If a voice message is left for the called extension, the notification will be cleared after each new
message has been played. (→ 1.21.2 Voice Mail DPT (Digital) Integration)
•
Message Waiting Notification via Voice Mail DTMF Integration
If a voice message is left for the called extension, the notification will be cleared either by the PBX after
the MESSAGE button (or a Message button) is pressed, or by the VPS after each new message has
been played, according to system programming. (→ 1.21.3 Voice Mail DTMF Integration)
Feature References
1.18.2 Flexible Buttons
Operation References
1.2.4 When the Dialed Line is Busy or There is No Answer
1.9.5 Voice Processing System
10.24 s
t
t=1.28 s
10.24 s
t
t=1.28 s
1.17 Message Features
10.24 s
20.48 s
10.24 s
20.48 s
Feature Guide
137