Panasonic KX-TDA100 Features Manual page 741

Intercept when the destination is Busy
Enables the Intercept Routing—Busy feature to activate when the original destination is busy.
Default
Disable (Busy Tone)
Value Range
Disable (Busy Tone): Sends busy tone to the caller (However, a call through LCOT or T1 [LCOT/GCOT] card
will ring at the original destination while the caller hears a ringback tone.)
Enable: Redirects the call to the intercept destination
Programming Guide References
None
Feature Guide References
1.1.1.5 Intercept Routing
Intercept when the destination sets DND
Enables the Intercept Routing—DND feature to activate when the original destination is in DND mode.
Default
Enable
Value Range
Disable (Busy Tone): Sends busy tone to the caller (However, a call through LCOT or T1 [LCOT/GCOT] card
will ring at the original destination while the caller hears a ringback tone.)
Enable: Redirects the call to the intercept destination
Programming Guide References
None
Feature Guide References
1.1.1.5 Intercept Routing
Routing to Operator when the destination is not programmed
Enables the Intercept Routing—No Destination feature to activate when there is no destination for the call.
(The Intercept Routing—No Destination feature always works for the calls through LCOT or T1 [LCOT/
GCOT] card, even when this feature is disabled.)
Default
Enable
Value Range
Disable (Reorder Tone): Sends the reorder tone to the caller
Enable: Redirects the call to an operator
4.16 CO & Incoming Call [10]
Feature Guide 741