Automatic Time Adjustment - Panasonic KX-TDA100 Features Manual

Item
Date & Time Set Year/Month/Date/
System
Password for
Installer
Operator &
Manager
Flexible
Numbering Type
Operator/Local
Access
Remote
Maintenance
Number
2.3.4

Automatic Time Adjustment

Description
The PBX clock can be adjusted automatically in the following two ways:
1.
Daylight Saving Time Setting
The start and end dates of Daylight Saving Time can be programmed. The PBX clock will automatically
adjust itself one hour forward or backward at 2:00 A.M. on the programmed date, if enabled through
system programming. At 2:00 A.M. on the start date, the clock will change to 3:00 A.M., and at 2:00
A.M. on the end date, the clock will change to 1:00 A.M.
Note
If a Timed Reminder (Wake-up call) is set:
– On the Daylight Saving Time start date, a reminder set for between 2:00 A.M. and 3:00 A.M.
will not ring.
– On the Daylight Saving Time end date, a reminder set for between 1:00 A.M. and 2:00 A.M.
will ring twice.
Parameter
The date and time set on the PC can be used by default.
Hour/Minute
4–10 characters Enter the system password for installer (→ 3.1 Introduction).
Extension Assign a PBX operator. (→ 2.2.5 Operator Features) This
Number extension will be the operator for all time modes, and is
automatically assigned manager status to perform manager
operations. (→ 2.2.6 Manager Features)
1.
Pattern 1
Select whether or not the prefix " " must be entered before dialing
feature numbers.
(with )
[Example] Call Pickup feature number
2.
Pattern 2
(without )
Pattern 1 (with
Pattern 2 (without
Note that certain feature numbers (Line Access numbers, Operator
Call, etc.) never need this prefix.
For a list of the default flexible numbers, refer to the [Flexible
Numbering Table (available while a dial tone is heard)] (→ 2.3.5
Flexible Numbering/Fixed Numbering).
1. Select the feature numbers for Operator Call and Idle Line Access.
0/9
These will be either 0 and 9, respectively, or 9 and 0, respectively.
2.
9/0
Remote Enter the complete telephone number of the PBX (including the
Maintenance Dial country code). When necessary, this number will be used to access
Number the PBX from a remote location for maintenance purposes.
Description
): 41
): 41
2.3 System Data Control
Feature Guide 249