Wired Extension-Extension Settings [4-1-1] Clip Generate - Panasonic KX-TDA100 Features Manual

Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, [, ] [Secret], and P [Pause])
Programming Guide References
4.10.3 Wired Extension—FWD/DND [4-1-2]
Feature Guide References
1.3.1.2 Call Forwarding (FWD)
FWD No Answer Time
Indicates the length of time an incoming call rings at the extension before the call is forwarded (reference
only).
Default
15 s
Value Range
0–120 s
Programming Guide References
4.10.3 Wired Extension—FWD/DND [4-1-2]
Feature Guide References
1.3.1.2 Call Forwarding (FWD)
4.10.2 Wired Extension—Extension Settings [4-1-1] CLIP
Generate
CLIP Generate allows CLIP numbers to be programmed at once for a set of locations in series. Pre-existing
CLIP numbers will be overwritten.
If a number generated here is longer than 16 digits, the additional digits will be discarded.
Beginning Entry Location (Ext. Number)
Specifies the extension number of the first location to be programmed.
Default
Extension number of port 01 of the first extension card that is installed.
Value Range
Wired extension number
4.10 Extension [4]
Feature Guide 617