Panasonic KX-TDA100 Features Manual page 351

Value Range
3–6 s
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None
First Dial Timer (CO)
Specifies the minimum time that the PBX waits after seizing a CO line, before sending the dialed digits to
the telephone company. This allows the telephone company to have enough time to accept the dialed digits
correctly.
Default
1.0 s
Value Range
0.5 × n (n=1–16) s
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None
CO Feed Back Tone
Specifies whether to turn on or turn off the pulse feedback tone. For outgoing CO line calls, the dialed
number is toned out, which informs the extension user that the dialed number has been dialed out.
Default
Yes
Value Range
No, Yes
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None
Bell Detection—Bell Start Detection Timer
Specifies the minimum time required by the PBX to confirm the bell signal sent from the telephone company,
before the PBX detects an arriving call.
4.7 Configuration [1]
Feature Guide 351