Group - Panasonic KX-TDA100 Features Manual

2.2 System Configuration—Software
2.2.2

Group

Description
This PBX supports various types of groups.
1.
CO Line Group
CO lines can be grouped into CO line groups based on carrier, CO line type, etc. (→ LCOT CO Line
Group Number [402]). Several settings can be assigned on a CO line group basis. All CO lines
belonging to a CO line group follow the programming for that CO line group.
Each CO line can belong to only one CO line group. CO lines are assigned to a CO line group based
on their port numbers (for LCOT and PRI cards) or their channel numbers (for T1 cards).
2.
Extension Group
Extensions can be grouped into extension groups (→ Extension Group [603]). Extension groups then
compose the following groups:
a)
Tenant (→ 2.2.3 Tenant Service)
b)
Call Pickup Group (See below.)
c)
Paging Group (See below.)
Every extension must belong to one extension group and cannot belong to more than one extension
group.
Assignable Extensions: Proprietary telephone (PT)/single line telephone (SLT)/portable station (PS)/
T1-OPX
[Example]
Extension Group 1
Extn. 100 Extn. 101
2.1.
Call Pickup Group (→ Extension Groups of a Pickup Group [650])
Using the Group Call Pickup feature, extensions can answer any calls within the call pickup group
to which they belong. One extension group can belong to several call pickup groups.
(→ 1.4.1.3 Call Pickup)
[Example]
Call Pickup Group 1
Extension Group 1
Extn. 100 Extn. 101
2.2.
Paging Group (→ Extension Groups of a Paging Group [640])
Using the Paging feature, extensions can make a page to any paging group or answer a page to
their own groups. One extension group or external pager (loudspeaker) can belong to several
232 Feature Guide
Extension Group 2 Extension Group 3
Extn. 102 Extn. 103 Extn. 104 Extn. 105
Call Pickup Group 2
Extension Group 2
Extn. 102 Extn. 103
Extension Group 4
Extn. 106 Extn. 107
Call Pickup Group 3
Extension Group 3 Extension Group 4
Extn. 104 Extn. 105 Extn. 106 Extn. 107