Panasonic KX-TDA100 Features Manual page 482

4.8 System [2]
Feature Guide References
1.27.2.2 Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected Name
Identification Presentation (CNIP/CONP)—by QSIG
2.3.5 Flexible Numbering/Fixed Numbering
CLIR Set / Cancel
Specifies the feature number used for setting or canceling the CLIR, which suppresses the presentation of
the caller's number to the called party.
Default
*7*1
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Programming Guide References
4.7.19 PRI Port [1-6]—Supplementary Service—COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR
Feature Guide References
1.19.1.2 Calling Line Identification Presentation (CLIP)
1.27.2.2 Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected Name
Identification Presentation (CNIP/CONP)—by QSIG
2.3.5 Flexible Numbering/Fixed Numbering
Switch CLIP of CO Line / Extension
Specifies the feature number used for sending either the CLIP number of the CO line in use (subscriber's
number) or the extension to the network.
Default
*7*2
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Programming Guide References
4.7.19 PRI Port [1-6]—CO Setting—Subscriber Number
4.10.1 Wired Extension—Extension Settings [4-1-1]—Option 1—CLIP ID
4.10.9 Portable Station—Extension Settings [4-2-1]—Option 1—CLIP ID
Feature Guide References
1.19.1.2 Calling Line Identification Presentation (CLIP)
2.3.5 Flexible Numbering/Fixed Numbering
Message Waiting Set / Cancel / Call Back
Specifies the feature number used for setting or canceling Message Waiting, or calling back the caller.
482 Feature Guide