Vm(Dpt) Group-System Setting [3-7-1] - Panasonic KX-TDA100 Features Manual

Overflow—Day, Lunch, Break, Night
Specifies the overflow destination of an unanswered call in each time mode.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [, ] [Secret], P [Pause], and F [Flash])
Programming Guide References
None
Feature Guide References
1.2.1 Idle Extension Hunting
Member Extension 1–16
Specifies the extension number of each member extension of the idle extension hunting group.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9)
Programming Guide References
None
Feature Guide References
1.2.1 Idle Extension Hunting
4.9.10 VM(DPT) Group—System Setting [3-7-1]
A Panasonic Voice Processing System (VPS) with DPT Integration can be connected to DPT ports of the
PBX. The DPT ports that are connected to the VPS are called a VM (DPT) Group.
A maximum of 2 VM (DPT) Groups can be programmed.
Call Waiting on VM Group
Enables the queuing of calls when all extension ports of the VM (DPT) group are busy. (Call Waiting tone is
not sent to any VM port.)
Default
Enable
Value Range
Disable, Enable
4.9 Groups [3]
Feature Guide 569