System Configuration-Software; Class Of Service (Cos) - Panasonic KX-TDA100 Features Manual

2.2 System Configuration—Software
2.2.1

Class of Service (COS)

Description
Each extension is assigned a Class of Service (COS) number (→ Class of Service [602]). The following
features operate differently depending on an extension's COS.
a)
Internal Call Block (→ 1.1.2.2 Internal Call Block)
b)
Call Forwarding (FWD) (→ 1.3.1.2 Call Forwarding (FWD))
c)
Do Not Disturb (DND) Override (→ 1.3.1.3 Do Not Disturb (DND))
d)
Call Pickup (→ 1.4.1.3 Call Pickup)
e)
Account Code Entry (→ 1.5.4.3 Account Code Entry)
f)
External Call Block (→ 1.5.5.3 CO Line Access)
g)
Executive Busy Override (→ 1.7.2 Executive Busy Override)
h)
Call Monitor (→ 1.7.3 Call Monitor)
i)
Off-hook Call Announcement (OHCA) (→ 1.7.4.3 Off-hook Call Announcement (OHCA))
j)
Whisper OHCA (→ 1.7.4.4 Whisper OHCA)
k)
Toll Restriction (TRS) (→ 1.8.1 Toll Restriction (TRS))
l)
Extension Lock (→ 1.8.2 Extension Lock)
m)
Walking COS (→ 1.8.4 Walking COS)
n)
CO Line Call Limitation (→ 1.10.8 CO Line Call Limitation)
o)
Call Transfer (→ 1.11.1 Call Transfer)
p)
Door Open (→ 1.15.2 Door Open)
q)
Direct Inward System Access (DISA) (→ 1.15.6 Direct Inward System Access (DISA))
r)
Wireless XDP Parallel Mode (→ 1.22.3 Wireless XDP Parallel Mode)
s)
Station Message Detail Recording (SMDR) for Outgoing CO Line Call (→ 1.23.1 Station Message
Detail Recording (SMDR))
t)
Time Service Switching (→ 2.2.4 Time Service)
u)
Manager Features (→ 2.2.6 Manager Features)
v)
PT Programming (→ 2.3.2 PT Programming)
Conditions
• Walking COS
Extension users can make a call from extensions of a less-privileged COS by using their own COS
temporarily.
Operation References
1.2.6 Calling without Restrictions
2.2 System Configuration—Software
Feature Guide 231