Panasonic KX-TDA100 Features Manual page 521

Programming Guide References
4.8.5 Timers & Counters—CO / Extension [2-4-1]—Automatic Redial : Waiting Time before the Called Party
Answers
Feature Guide References
1.6.1.3 Last Number Redial
Extension - CO Call Limitation
Selects whether the time limit for extension-to-CO line calls applies to outgoing calls only or for both
outgoing and incoming calls. COS determines the use of this feature, and the length of time limit can be
assigned on a CO line group basis.
Default
for Outgoing
Value Range
for Outgoing, for Outgoing + Incoming
Programming Guide References
4.8.15 Class of Service—COS Settings [2-7-1]—TRS / CO—Extension-CO Line Call Duration Limit
4.9.1 Trunk Group—TRG Settings [3-1-1]—Main—Extension-CO DurationTime
Feature Guide References
1.10.8 CO Line Call Limitation
Save the Dial as Redial after Called Party's Answer
Specifies whether the number of the connected party to use for redialing is saved.
Default
No
Value Range
No, Yes
Programming Guide References
None
Feature Guide References
1.6.1.3 Last Number Redial
SLT Ringing for Make Call (CTI)
Specifies whether to ring the SLT when a call has been made from CTI instead of an SLT.
Default
No Ring
4.8 System [2]
Feature Guide 521