Speed Dialing-Personal/System - Panasonic KX-TDA100 Features Manual

1.6 Memory Dialing Features
1.11.1 Call Log
1.6.1.4 Speed Dialing—Personal/System
Description
An extension user can make calls using abbreviated dialing for frequently dialed numbers which are stored
in the PBX, either in the extension's Personal Speed Dialing, or in System Speed Dialing (→ System Speed
Dialing Number [001]).
Personal Speed Dialing is also known as Station Speed Dialing.
Conditions
[General]
• Any number, such as a telephone number or feature number, can be stored in Speed Dialing. A name
can be assigned to each Personal Speed Dialing number through personal programming, and also to
each System Speed Dialing number (→ System Speed Dialing Name [002]).
• Call Directory—Speed Dialing
Display proprietary telephone (PT) users can make a call by selecting a stored name shown on the
display.
[Personal Speed Dialing]
• Personal Speed Dialing Display Lock
An extension user can lock his or her Personal Speed Dialing display to prevent others from viewing it.
In this case, the Incoming and Outgoing Call Log information displays are also locked. An extension
personal identification number (PIN) is required to use this feature. (→ 1.25.1 Extension Personal
Identification Number (PIN))
[System Speed Dialing]
• TRS Override by System Speed Dialing
It is possible to override Toll Restriction (TRS) when dialing a number using System Speed Dialing (→
TRS Level for System Speed Dialing [509]). (→ 1.8.1 Toll Restriction (TRS))
• System Speed Dialing Display by AUTO DIAL/STORE Button
Pressing the AUTO DIAL/STORE button on a display DPT or KX-T7735 while on-hook can display the
System Speed Dialing Directory.
• When an MEC card is installed in the PBX, System Speed Dialing numbers can be assigned separately
for each tenant. Each tenant can select to use either the original set of common System Speed Dialing
numbers or that tenant's private set.
Operation References
1.2.2 Easy Dialing
1.11.1 Call Log
1.11.2 Directories
3.1.2 Settings on the Programming Mode
3.3 System Programming
76 Feature Guide