3.2 PC Programming
268
Feature Guide
3. Enter a valid programmer code (INSTALLER, ADMIN, or
USER), then click [OK].
Note
When starting KX-TDA Maintenance Console for the
first time (i.e., either when the PBX is still set to the
factory default settings, or after initializing the PBX),
Quick Setup can be launched automatically by
entering the Installer Level Programmer Code and
password. (→ 2.3.3 Quick Setup)
4. Click "Connect" → "USB" from the menu bar.
Note
To connect to the PBX via USB, the KX-TDA USB
driver must be installed on the PC, as explained above
in "Installing KX-TDA Maintenance Console".
5. Enter the password appropriate to the programmer code
entered in Step 2 and click [OK].
Note
The password for each programmer code is 1234 by
default. (→ 2.3.1 PC Programming)
6. Follow the Quick Setup instructions if starting KX-TDA
Maintenance Console for the first time, otherwise, proceed
to the next step.