Panasonic KX-TDA100 Features Manual page 394

4.7 Configuration [1]
• If the registration is still in the process, the dialog box will show "Waiting: PS Registration".
Click Close.
• If the registration is successful, the dialog box will show "Registration Succeed".
If there are more PSs to be registered, click Continue to resume or Quit to terminate the
registration. If not, click Close.
• If the registration is unsuccessful, the dialog box will show "Registration Error". Click Close.
The registration will be terminated.
Once the PS is successfully registered, the status of the PS will update to show "Registered".
While the registration is executing, it is possible to abort registration by clicking Halt in the step 5 above.
However, if the registration is already completed, the registration cannot be aborted and the dialog box will
show "Registration Halt: NG". Click Continue and confirm the progress of registration.
De-registration
Follow the steps below to de-register the PS.
1.
Select the PS by clicking the Select cell and set it to ON.
More than one PS can be selected at a time (only the registered PS can be selected).
2.
Click De-registration.
• If the de-registration is successful, the dialog box will show "De-registration Succeed".
If there are more PSs to be de-registered, click Continue to resume or Quit to terminate the
de-registration. If not, click Close.
• If the de-registration is unsuccessful, the dialog box will show "De-registration Error". Click
Close. De-registration will be terminated.
Once the PS is successfully de-registered, the status of the PS will update to show "None".
Forced De-registration
Follow the steps below to forcibly de-register the PS when normal de-registration has been unsuccessful or
de-registration has been performed only on the PS.
1.
Select the PS by clicking the Select cell and set it to ON.
More than one PS can be selected at a time (only the unregistered PS with an extension number
can be selected).
2.
Click Forced De-registration.
3.
Click OK.
If the forced de-registration is successful, the dialog box will show "Forced De-registration
Succeed".
If there are more PSs to be de-registered, click Continue to resume or Quit to terminate the forced
de-registration. If not, click Close.
Once the PS is successfully de-registered, the status of the PS will update to show "None".
Index
Indicates the PS number (reference only).
Default
Not applicable.
Value Range
1–128
394 Feature Guide