Remote Extension Control By User - Panasonic KX-TDA100 Features Manual

1.25 Extension Controlling Features
• To use the voice message feature:
An MSG card is required and a message must be recorded. An extension assigned as a manager can
record messages. (→ 1.15.5 Outgoing Message (OGM)) A different message can be assigned for each
time mode (→ 2.2.4 Time Service).
Connection References
2.6.5 MSG4 Card
Operation References
1.7.1 Timed Reminder
2.1.6 Hospitality Features

1.25.5 Remote Extension Control by User

Description
Extension users can remotely change the feature settings, such as Call Forwarding (FWD), and time service
mode for their own extensions from inside or outside the PBX using Direct Inward System Access (DISA)
(→ 1.15.6 Direct Inward System Access (DISA)). This feature can be used only on the extensions which,
through Class of Service (COS) programming are allowed to be controlled remotely.
The following feature settings can be changed:
a)
FWD/Do Not Disturb (DND) (→ 1.3.1 Call Forwarding (FWD)/Do Not Disturb (DND))
b)
Log-in/Log-out (→ 1.2.2.6 Log-in/Log-out)
c)
Absent Message (→ 1.17.2 Absent Message)
d)
Extension Lock (→ 1.8.2 Extension Lock)
e)
Time Service—Changing the Time Mode (day/lunch/break/night) (→ 2.2.4 Time Service)
This feature is also known as Remote Station Control by User.
Conditions
• Extension PIN
An extension personal identification number (PIN) (→ Extension Personal Identification Number (PIN)
[005]) is required to use this feature. (→ 1.25.1 Extension Personal Identification Number (PIN)) If the
PIN is entered incorrectly three times, the line will be disconnected.
• Internal Call Block (→ 1.1.2.2 Internal Call Block) also determines which extensions can perform
remote operations on which extensions, i.e., if extension 101 cannot call extension 201, then it cannot
remotely operate extension 201 either.
Operation References
1.2.8 Remote Setting
188 Feature Guide