Panasonic KX-TDA100 Features Manual page 338

4.6 Help
A • Change the extension number of the target port to the new number, and click Apply.
Then set the port to OUS status, and then back to INS status.
Q During a conversation, I changed the extension number of a wired extension,
but the display still shows the previous extension number.
A • The extension number will not change while the extension is in use. When the
conversation is finished, set the port to OUS status, and then back to INS status.
Q How do I change the type of an extension port?
A • Set the port to OUS status. Then, change Type in the Configuration—Extension Port
window (see "4.7.23 Extension Port [1-8]").
I have set the type of an extension port to "DSS Console", but I cannot apply
Q
this setting. (Error E000402)
A • The number entered in Location No. on the Configuration—Extension Port screen
(see "4.7.23 Extension Port [1-8]") is the same as that entered for another DSS Console.
Change this so that the numbers do not overlap.
Q I have set the type of an extension port to "VM (DPT)", but I cannot apply this
setting. (Error E000403)
A • The VM Unit No. and Port No. settings entered on the Configuration—Extension Port
screen (see "4.7.23 Extension Port [1-8]") are the same as those entered for another VM
(DPT). Change this so that the numbers do not overlap.
Q
I have set the type of an extension port to "PC Console", but I cannot apply this
setting. (Error E000402)
A • The number entered in Location No. on the Configuration—Extension Port screen
(see "4.7.23 Extension Port [1-8]") is the same as that entered for another PC Console.
Change this so that the numbers do not overlap.
What programming do I have to perform to use a headset with an extension?
Q
A • Set Headset OFF/ON on the Configuration—Extension Port screen (see "4.7.23
Extension Port [1-8]") to "Headset ON".
Q What programming do I have to perform to use XDP with an extension port?
A • Set XDP Mode on the Configuration—Extension Port screen (see "4.7.23 Extension
Port [1-8]") to "On".
Q Modified settings are not saved even when I press the Apply button.
A • To save the system data files, choose Save from the File menu.
Q How do I change the extension numbering plan from 3-digit numbers to 4-digit
numbers?
A • From the System—Numbering Plan—Extension screen (see "4.8.10 Numbering
Plan—Extension [2-6-1]"), enter a 2-digit number in Leading Number, or change
Additional Digits from "x" to "xx".
For more details, see What is the procedure to modify the Numbering Plan?.
338 Feature Guide