Lco Port [1-5] Port Command; Pri Port [1-6] - Panasonic KX-TDA100 Features Manual

Value Range
0.5 s, 1.5 s, 2.0 s, 4.0 s, 12.0 s
Feature Guide References
None

4.7.18 LCO Port [1-5] Port Command

Commands for the LCO ports can be programmed.
INS
Puts the port in service.
Default
Not applicable.
Value Range
Not applicable.
Programming Guide References
4.7.17 LCO Port [1-5]
Feature Guide References
None
OUS
Takes the port out of service. This enables a temporary non-use of the port, for example, for the purpose of
repair.
Default
Not applicable.
Value Range
Not applicable.
Programming Guide References
4.7.17 LCO Port [1-5]
Feature Guide References
None

4.7.19 PRI Port [1-6]

Various settings can be programmed for each PRI port.
4.7 Configuration [1]
Feature Guide 401