Panasonic KX-TDA100 Features Manual page 142

1.18 Proprietary Telephone (PT) Features
Button
External Feature Access (EFA) Used to send a flash/recall signal to the telephone company or host
Call Park
Call Park (Automatic Park
Zone)
Call Log
Log-in/Log-out*
Hurry-up
Wrap-up*
System Alarm
Time Service*
Answer
Release
Toll Restriction
Calling Line Identification
Restriction (CLIR)*
Connected Line Identification
Restriction (COLR)
Headset
Time Service Switching Mode
(Automatic/Manual)*
Two-way Record
Two-way Transfer
One-touch Two-way Transfer
142 Feature Guide
PBX to access external features. (→ 1.10.7 External Feature Access
(EFA))
Used to park or retrieve a call in a preset PBX parking zone. (→ 1.12.2
Call Park)
Used to park a call in an idle PBX parking zone automatically. (→ 1.12.2
Call Park)
Used to show a log of received calls. (→ 1.16.2 Incoming Call Log)
Used to switch between Log-in and Log-out status. (→ 1.2.2.6 Log-in/
Log-out)
Used to redirect the longest waiting call in the queue of an ICD group to
the overflow destination. (→ 1.2.2.3 Queuing Feature)
Used to switch between Wrap-up/Not Ready and Ready modes. (→
1.2.2.6 Log-in/Log-out)
Used to display a PBX error. (→ 2.4.3 Local Alarm Information)
Used to change or display the current time mode (day/lunch/break/
night). (→ 2.2.4 Time Service)
Used to answer an incoming call. (→ 1.10.4 Headset Operation)
Used to disconnect the line during or after a conversation, or to
complete a Call Transfer. (→ 1.10.4 Headset Operation)
Used to change the Toll Restriction (TRS) level of other extension users
temporarily. (→ 1.8.3 Dial Tone Transfer)
Used to switch between CLIP and CLIR service. (→ 1.19.1.2 Calling
Line Identification Presentation (CLIP), and 1.27.2.2 Calling/Connected
Line Identification Presentation (CLIP/COLP) and Calling/Connected
Name Identification Presentation (CNIP/CONP)—by QSIG)
Used to switch between COLP and COLR services. (→ 1.27.2.2 Calling/
Connected Line Identification Presentation (CLIP/COLP) and Calling/
Connected Name Identification Presentation (CNIP/CONP)—by QSIG)
Used to turn headset mode on/off while idle.
Used to switch between hands-free mode and headset modes during a
conversation. (→ 1.10.4 Headset Operation)
Used to switch between Automatic Switching and Manual Switching
mode. (→ 2.2.4 Time Service)
Used to record a conversation into your own mailbox. (→ 1.21.2 Voice
Mail DPT (Digital) Integration)
Used to record a conversation into the mailbox of a specified extension.
(→ 1.21.2 Voice Mail DPT (Digital) Integration)
Used to record a conversation into the mailbox of a specified extension
with a one-touch operation. (→ 1.21.2 Voice Mail DPT (Digital)
Integration)
Usage