Pri Port [1-6] Port Command - Panasonic KX-TDA100 Features Manual

Value Range
CO: For connecting to public network
Extension: For connecting to extension
QSIG-Slave: For connecting to private network (slave port)
QSIG-Master: For connecting to private network (master port)
Feature Guide References
None
Connection
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
• Click the desired cell in the column.
• Use the arrow keys to select the desired cell in the column, and then click Command.
Default
Current status
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Feature Guide References
None
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR
Specifies whether each ISDN or QSIG supplementary service is used.
Default
No
Value Range
No, Yes
Feature Guide References
None

4.7.20 PRI Port [1-6] Port Command

Commands for the PRI ports can be programmed.
INS
Puts the port in service.
4.7 Configuration [1]
Feature Guide 415