Time Service-Week Table [2-5-1] - Panasonic KX-TDA100 Features Manual

4.8 System [2]
Programming Guide References
None
Feature Guide References
1.1.3.3 Call Waiting
External Sensor Ringing Continuous Timer
Specifies the length of time that the PBX waits for the called party to answer before cancelling a sensor call.
Default
30 s
Value Range
10 × n (n=1–15) s
Programming Guide References
None
Feature Guide References
1.15.7 External Sensor
4.8.8 Time Service—Week Table [2-5-1]
A specific time mode (day, night, lunch, or break) can be selected for operation depending on the time of
the day. The time mode can be switched either automatically or manually. Select the desired switching mode
from the Time Service Switching Mode list.
The number of a Time Table corresponds to the number of a tenant. Select the desired Time Table from the
Time Table No. list.
When in the Automatic Switching mode, time modes of the tenant are switched as programmed in the
corresponding Time Table. Manual switching is possible only from an authorized extension (determined by
COS).
Day / Lunch / Night
Time Tables containing day, lunch, and night start times can be programmed for each day of the week.
Day 1 Start—Setting
Enables the setting of the Day 1 start time.
Default
Enable
Value Range
Disable, Enable
Feature Guide 461