Panasonic KX-TDA100 Features Manual page 336

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA100:
Table of Contents

Advertisement

4.6 Help
A
With the new card installed, does the total number of extensions or CO lines exceed the
maximum supported by the PBX?
Is the type of card installed in the slot different from the card type set as "Pre-INS" for that
slot? Confirm that the correct card is installed in the slot.
Is the card firmly and fully installed in the slot? Confirm that the card is installed correctly
in the slot.
Confirm that the card is not damaged.
Q
I want to set the status of only 1 port of the IP-GW4 card to "OUS".
A
The IP-GW4 card requires both ports to be set to "OUS"/"INS" together.
Q
When registering a Portable Station, I set an extension number, click the Select
cell to set it to ON (blue), and click Registration, but the registration process
does not execute.
A
After setting the extension number, click Apply to update the PBX with the change before
continuing.
Q
I cannot register Portable Stations using the method described in Portable
Station [1-2].
A
Is the status of the CSIF, DHLC or DLC card set to "INS"?
Is a CS connected to the CSIF, DHLC or DLC card? If not, connect one.
Do the PINs (Personal Identification Numbers) of the PBX and the Portable Station
match? Confirm that they are the same.
Is the Portable Station within transmission range of the CS?
Has the Portable Station previously been registered at another location?
It is not possible to register a Portable Station at 2 locations, so use the Forced De-
registration option to delete the previous registration.
Q
I cannot delete the extension number of a Portable Station.
A
First, de-register the Portable Station itself, and then delete the extension number.
Q
I cannot de-register a Portable Station.
A
Is the Portable Station turned on? If not, turn it on.
Is the Portable Station within transmission range of the CS? If not, move it closer to the
CS and try the de-registration operation again.
The Portable Station I want to de-register is broken, and will not turn on, or is
Q
not available, or the registration information was deleted first from the Portable
Station, so it cannot be de-registered.
A
The Portable Station can be forcibly de-registered by the following steps.
1.
In the Portable Station screen (see "4.7.14 Portable Station [1-2]"), click the Select
cell of the Portable Station you want to delete to set it to ON (blue).
2.
Click Forced De-registration.
3.
Confirm that the status changes to "None".
Q
I changed the extension number of a Portable Station, but the display of the
Portable Station still shows the old extension number.
336
Feature Guide

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda200

Table of Contents