Panasonic KX-TDA100 Features Manual page 435

2.
Select the IP-PT by clicking the Select cell and set it to ON.
More than one IP-PT can be selected at a time (only unregistered IP-PTs with an extension number
can be selected).
3.
Click Registration.
A dialog box will appear when the registration starts to execute.
4.
Click Confirm.
• If the registration is still in process, the dialog box will show "Waiting: IP-PT Registration". Click
Close.
• If the registration is successful, the dialog box will show "Registration Succeed".
If there are more IP-PTs to be registered, click Continue to resume or Quit to terminate the
registration. If not, click Close.
• If the registration is unsuccessful, the dialog box will show "Registration Error". Click Close.
The registration will be terminated.
Once the IP-PT is successfully registered, the status of the IP-PT will update to show "Registered".
While the registration is executing, it is possible to abort registration by clicking Halt in step 4 above.
However, if the registration is already completed, the registration cannot be aborted and the dialog box will
show "Registration Halt: NG". Click Continue and confirm the progress of registration.
De-registration
Follow the steps below to de-register the IP-PT.
1.
Select the IP-PT by clicking the Select cell and set it to ON.
More than one IP-PT can be selected at a time (only registered IP-PTs can be selected).
2.
Click De-registration.
• If the de-registration is successful, the dialog box will show "De-registration Succeed".
If there are more IP-PTs to be de-registered, click Continue to resume or Quit to terminate
the de-registration. If not, click Close.
• If the de-registration is unsuccessful, the dialog box will show "De-registration Error". Click
Close. De-registration will be terminated.
Once the IP-PT is successfully de-registered, the status of the IP-PT will update to show "None".
Forced De-registration
Follow the steps below to forcibly de-register the IP-PT when normal de-registration has been unsuccessful
or IP address settings have been changed or deleted only on the IP-PT.
1.
Select the IP-PT by clicking the Select cell and set it to ON.
More than one IP-PT can be selected at a time (only unregistered IP-PTs with extension numbers
can be selected).
2.
Click Forced De-registration.
3.
Click OK.
If the forced de-registration is successful, the dialog box will show "Forced De-registration
Succeed".
If there are more IP-PTs to be de-registered, click Continue to resume or Quit to terminate the
forced de-registration. If not, click Close.
Once the IP-PT is successfully de-registered, the status of the IP-PT will update to show "None".
Slot
Indicates the slot position (reference only).
4.7 Configuration [1]
Feature Guide 435