Call Pickup - Panasonic KX-TDA100 Features Manual

1.4 Answering Features
Conditions
[Prime Line]
• The priority of the incoming call is as follows:
1)
The call arriving at a button on which the "Prime Line" is assigned.
2)
The call arriving at the INTERCOM button.
Operation References
3.1.2 Settings on the Programming Mode
1.4.1.3

Call Pickup

Description
An extension user can answer a call ringing at any other extension.
The following types of Call Pickup are available:
Type
Directed
Group
Call Pickup Deny
An extension user can prevent other extensions from picking up calls ringing at his or her own extension.
Conditions
• Call Pickup applies to:
Intercom, CO line, and doorphone calls
• Internal Call Block
An extension which cannot call certain extensions based on Class of Service (COS) programming (→
1.1.2.2 Internal Call Block) also cannot pick up calls ringing at those extensions.
[Directed Call Pickup]
• A user can also pick up a call to a specified extension by pressing the corresponding DSS button. COS
programming determines the extensions that can use this feature.
The light pattern of a DSS button for an incoming call to an extension or incoming call distribution (ICD)
group can be programmed through system programming. Call Pickup is available only when the DSS
button is red flashing.
[Group Call Pickup]
• A specified number of call pickup groups can be created (→ Extension Groups of a Pickup Group
[650]), each of which consists of extension groups. One extension group can belong to several call
pickup groups. (→ 2.2.2 Group)
60 Feature Guide
A specified extension's call is answered.
A call within a specified call pickup group is answered.
Description