Panasonic KX-TDA100 Features Manual page 95

[Command Explanation]
Command
C Inserts the Carrier Access Code
H Inserts the user-dialed number minus any removed digits
P Analog Line: Inserts a pause
ISDN/T1 Line: Inserts a pause and changes dialing mode to tone (DTMF)
A Inserts the Authorization Code for Tenant
G Inserts the Authorization Code for CO Line Group
I Inserts the Itemized Billing Code
[0-9, , #] You can enter any of these digits in a modify command
[Programming Example: Carrier Table]
Carrier Name *1
CO Line Group *2
Carrier Access Code
Removed No. of Digits
Modify Command
In this example
Dialed number: 9-1-212-555-5555
Modification:
9 1
Remove 1 digit
CO Line Access no. is ignored
→ ARS Carrier Name [350]
*1
→ ARS CO Line Group for Carrier Access [351]
*2
→ ARS Carrier Access Code [353]
*3
→ ARS Removed Number of Digits for Carrier Access [352]
*4
6.
ARS Options
Authorization Code for Tenant
A Carrier Authorization Code can be assigned to each tenant.
Authorization Code for CO Line Group
A Carrier Authorization Code can be assigned to each CO line group.
Itemized Billing Code
An Itemized Billing Code can be assigned for each extension and for each verified code.
If a call is not made from an extension, such as via Direct Inward System Access (DISA) or TIE line,
and no verified code is used, the Itemized Billing Code assigned to location 1 in the Verified Code Table
will be used.
Description
Carrier 1 Carrier 2
Carrier A Carrier J
1, 2, 3 4
*3 0880 0700
*4 1 3
CH CPH
2125555555 0880
Add the Carrier Access Code
1.9 Automatic Route Selection (ARS) Features
2125555555
Feature Guide 95