Panasonic KX-TDA100 Features Manual page 529

Default
Current slot number-Master CS port number
Value Range
Not applicable.
Feature Guide References
None
Radio System ID
Indicates the radio system ID used to register a PS (reference only).
Default
Radio system ID
Value Range
Not applicable.
Feature Guide References
None
Call Log by Redial Button
Enables the PBX to show Outgoing Call Log on a display of a DPT when the REDIAL button is pressed while
it is on hook.
Default
Disable
Value Range
Disable, Enable
Programming Guide References
None
Feature Guide References
1.6.1.3 Last Number Redial
Call Pickup by DSS Key for Direct Incoming Call
Specifies whether a DSS button will light up or flash when a call rings at the specified extension. To enable
this setting, DSS Key mode for Incoming call on this screen must be set to ON or Flash.
Default
Enable
4.8 System [2]
Feature Guide 529