Panasonic KX-TDA100 Features Manual page 362

4.7 Configuration [1]
ISDN CO / QSIG Master / QSIG Slave—T308
Specifies the maximum time the PBX waits for a reply after receiving the Release message to ISDN.
Default
40 × 100 ms
Value Range
0–600 × 100 ms
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None
ISDN CO / QSIG Master / QSIG Slave—T309
Specifies the length of time that the PBX tries to disconnect the data link, before saving the call.
Default
120 × 100 ms
Value Range
0–3000 × 100 ms
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None
ISDN CO / QSIG Master / QSIG Slave—T310
Specifies the maximum time the PBX waits for a continuance message after receiving the Incoming Call
Proceeding message.
Default
1100 × 100 ms
Value Range
0–3000 × 100 ms
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None
362 Feature Guide