Panasonic KX-TDA100 Features Manual page 537

Channel Seizure Signal Bits
Specifies the number of seizure bits to send when sending Caller ID information to an SLT.
Default
300 bits
Value Range
10 × n (n=3–40) bits
Programming Guide References
None
Feature Guide References
1.16.1 Caller ID
Mark Signal Bits
Specifies the number of mark bits to send when sending Caller ID information to an SLT.
Default
180 bits
Value Range
10 × n (n=3–40) bits
Programming Guide References
None
Feature Guide References
1.16.1 Caller ID
Channel Seizure Wait Time
Specifies the length of time the PBX waits before starting to send the seizure signal following the first ring
when sending Caller ID information to an SLT.
Default
512 ms
Value Range
64 × n (n=5–35) ms
Programming Guide References
None
Feature Guide References
1.16.1 Caller ID
4.8 System [2]
Feature Guide 537