Panasonic KX-TDA100 Features Manual page 354

4.7 Configuration [1]
4.7.17 LCO Port [1-5]
Feature Guide References
None
Low Speed Pulse Dial—Make Width
Specifies the minimum length of the make signal in a low speed pulse dial. Low Speed Pulse Dial—Pulse
% Break on this screen determines the value that can be specified here.
Default
40 ms
Value Range
4 × n (n=3–15) ms
Programming Guide References
4.7.1 Slot [1-1]
4.7.17 LCO Port [1-5]
Feature Guide References
None
High Speed Pulse Dial—Pulse % Break
Specifies the % break for a high speed pulse dial. This is the ratio between the break (on-hook) signal and
make (off-hook) signal in a pulse dial.
Default
60 %
Value Range
Other, 60 %, 67 %
Programming Guide References
4.7.1 Slot [1-1]
4.7.17 LCO Port [1-5]
Feature Guide References
None
High Speed Pulse Dial—Break Width
Specifies the maximum length of the break signal in a high speed pulse dial. High Speed Pulse Dial—
Pulse % Break on this screen determines the value that can be specified here.
Default
32 ms
354 Feature Guide