External Feature Access (Efa); Co Line Call Limitation - Panasonic KX-TDA100 Features Manual

Hybrid ip-pbx

Hide thumbs Also See for KX-TDA100:

Table of Contents

1.10 Conversation Features

1.10.7 External Feature Access (EFA)

An extension user can access features of a host PBX or the telephone company, such as Transfer, Hold,

Call Waiting, etc. A flash/recall signal is sent to the host PBX or the telephone company. This is only

available on CO line calls, including Host PBX Access (→ 1.5.4.6 Host PBX Access Code (Access Code to

the Telephone Company from a Host PBX)).

Flash/Recall Time

The Flash/Recall time can be assigned for each CO line port (→ LCOT Flash/Recall Time [417]).

A flexible button can be customized as the EFA button.

This feature is accessed by pressing the FLASH/RECALL button which is set to EFA mode (→ 1.10.6

Flash/Recall/Terminate) or the EFA button. It is also possible to perform this feature by entering the

feature number when the current call is placed on a consultation hold (→ 1.12.5 Consultation Hold).

Feature References

1.18.2 Flexible Buttons

Operation References

1.9.4 Host PBX

CO Line calls are limited by the following features:

Extension-to-CO Line

Call Duration

Feature Guide

If a call between an extension user and an outside party is established, the

call duration can be restricted by the system timer selected for each CO line

group (→ Extension-to-CO Line Call Duration [472]). Both parties will hear an

alarm tone 15 seconds before the timer expires, at five-second intervals. If

the timer expires, the line will be disconnected.

Class of Service (COS) programming determines whether this feature is

enabled or disabled (→ CO Line Call Duration Limitation [502]). Whether this

feature is applied to outgoing calls only or to both incoming and outgoing calls

is also programmable.

Show Quick Links

Table of Contents