Panasonic KX-TDA100 Features Manual page 427

1.
Set the status of the extension port to "OUS".
2.
Change the port type of the extension port, then click Apply.
3.
Set the status of the extension port to "INS".
When changing the port type of an extension port for which Wireless XDP has been set on the 4.10.1
Wired Extension—Extension Settings [4-1-1] screen, the Wireless XDP setting must be deleted
first.
Default
Normal
Value Range
Normal: For connecting a DPT
DSS: For connecting a DSS Console (A maximum of 8 DSS Consoles can be connected to the PBX.)
VM (DPT): For connecting a Panasonic VPS through DPT Integration
PC Console: For connecting a PC Console (A maximum of 8 PC Consoles can be connected to the PBX.)
Programming Guide References
4.7.24 Extension Port [1-8] Port Command
Feature Guide References
None
DPT Property—Location No. (for DPT or S-Hybrid port)
Specifies the location number of the connected DSS Console or PC Console.
Note that, depending on system traffic, there may be a limit to the number of PC Consoles that can be
supported by a single DLC/DHLC card
Default
1
Value Range
1–8
Feature Guide References
None
DPT Property—VM Unit No. (for DPT or S-Hybrid port)
Selects the unit number of the connected VPS.
Default
1
Value Range
1, 2
4.7 Configuration [1]
Feature Guide 427