4.15 Private Network [9]
Network BLF(DSS) Data Transfer for ISDN->VoIP
Selects whether to re-send BLF data received from an ISDN port through any VoIP ports that are set to
transmit BLF data.
Default
Disable
Value Range
Disable, Enable
Programming Guide References
4.15.3 Network Operator (VoIP) [9-3]—IP-GW Card Slot No. to notify BLF data to Network Operator
Feature Guide References
1.27.2.3 Network Direct Station Selection (NDSS) (KX-TDA0920 required)
Network BLF(DSS) Data Transit Counter
Specifies the maximum number of "hops", or transmissions between two PBXs, before a packet of BLF data
is discarded.
Default
8
Value Range
0–63
Programming Guide References
None
Feature Guide References
1.27.2.3 Network Direct Station Selection (NDSS) (KX-TDA0920 required)
Network BLF(DSS) Data Broadcasting Interval Timer
Specifies the frequency of BLF data transmission. The PBX will send data over the network periodically
according to the interval specified here.
Default
3000 ms
Value Range
100 × n (n=0–30) ms
Programming Guide References
None
722
Feature Guide