Panasonic KX-TDA100 Features Manual page 48

1.2 Receiving Group Features
Log-in/Log-out
Button Type
Group not
specified
Group is specified Log-in/Log-out button is
All groups
• If a Log-in/Log-out button and a G-DN button are created for the same group, the G-DN button will also
indicate the Log-in/Log-out status of the group (→ 1.18.3 LED Indication).
• Wrap-up Button
Any flexible button can be customized as the Wrap-up button. It shows the current status as follows:
Light pattern
Slow red flashing
Red on
Off
• Group Call Waiting cannot be used simultaneously with Wrap-up. This is because when an extension
user completes a call with Call Waiting, the extension starts to ring immediately—the user is not given
any Wrap-up time. Call Waiting must be turned off on each extension that wants to use Wrap-up
feature.
• When a portable station (PS) in Wireless XDP Parallel Mode completes a call, neither the PS nor its
wired telephone can have Wrap-up time. (→ 1.22.3 Wireless XDP Parallel Mode)
• Automatic Log-out
An extension may be logged-out from a group automatically after the preprogrammed number of calls
go unanswered. This allows extensions to be logged-out automatically in the event users leave their
desks and forget to log out.
The number of consecutive unanswered calls before Automatic Log-out is applied can be programmed
for each ICD group. If an extension is a member of more than one ICD group, all calls unanswered by
the extension are tallied. Once an extension has been automatically logged out, the user can log back
in manually.
Automatic Log-out does not apply to extensions in an ICD group using Ring distribution.
• Log-in/Log-out Monitor
The supervisor extension can monitor and control the Log-in/Log-out status of group members. (→
1.2.2.7 Supervisory Feature)
48 Feature Guide
Usage
Log-in/Log-out button is
pressed, followed by the
floating extension number
or Group Directory Number
(G-DN) button of the
desired group. Press to
log-in/log-out of all groups.
pressed. The
preprogrammed group is
logged-in to/logged-out
from.
Log-in/Log-out button is
pressed. All groups the
user belongs to are logged-
in to/logged-out from.
Status
Wrap-up
Not Ready
Ready
Programming
A flexible button must be
customized as the Log-in/
Log-out button.
The desired group's
floating extension number
must be programmed
when creating the Log-in/
Log-out button.
must be entered when
creating the Log-in/Log-out
button.
Light Pattern
Red on Off
— —
When When
logged-out logged-in
When When
logged-out logged-in