Ring Tone Patterns-Call From Co [2-8-1]; Ring Tone Patterns-Call From Doorphone [2-8-2] - Panasonic KX-TDA100 Features Manual

4.8 System [2]
4.10.1 Wired Extension—Extension Settings [4-1-1]—Main—COS
4.10.9 Portable Station—Extension Settings [4-2-1]—Main—COS
4.11.1 Doorphone [5-1]—COS
Feature Guide References
1.1.2.2 Internal Call Block
4.8.18 Ring Tone Patterns—Call from CO [2-8-1]
Different ring tone patterns can be selected for incoming CO line calls depending on the CO line groups the
calls come through. A maximum of 8 Ring Tone Pattern Tables can be programmed, and any pattern table
can be selected for use by an extension.
Ring Tone Pattern Table 1–8
Specifies the ring tone pattern for incoming CO line calls.
Default
Single
Value Range
Single, Double, Triple
Programming Guide References
4.16.1 CO Line Setting [10-1]—Trunk Group Number
4.10.1 Wired Extension—Extension Settings [4-1-1]—Main—Ring Pattern Table
4.10.9 Portable Station—Extension Settings [4-2-1]—Main—Ring Pattern Table
Feature Guide References
1.1.3.2 Ring Tone Pattern Selection
4.8.19 Ring Tone Patterns—Call from Doorphone [2-8-2]
Different ring tone patterns can be selected for incoming doorphone calls depending on the doorphone ports
the calls come through. A maximum of 8 Ring Tone Pattern Tables can be programmed, and any pattern
table can be selected for use by an extension.
Ring Tone Pattern Table 1–8
Specifies the ring tone pattern for incoming doorphone calls.
Default
Triple
Value Range
Single, Double, Triple, S-Double
510 Feature Guide