Extension Hunting Group [3-6] - Panasonic KX-TDA100 Features Manual

4.9 Groups [3]
Programming Guide References
None
Feature Guide References
1.2.2.3 Queuing Feature
4.9.9

Extension Hunting Group [3-6]

If an extension within an idle extension hunting group is called when it is busy or in DND mode, the call can
be redirected to another extension in the same hunting group, according to a preprogrammed hunting type.
If there is no idle extension in the group, the call can then be redirected to the overflow destination, which
can be different depending on the time mode (day/lunch/break/night). A maximum of 64 hunting groups can
be programmed, each containing up to 16 extensions.
Hunting Group Name
Specifies the name of the hunting group.
Default
Not stored.
Value Range
Max. 20 characters
Programming Guide References
None
Feature Guide References
1.2.1 Idle Extension Hunting
Hunting Type
Specifies the hunting type for the hunting group.
Default
Circular
Value Range
Circular: Circulates until the call is answered or overflowed
Terminated: Terminates at the last extension
Programming Guide References
None
Feature Guide References
1.2.1 Idle Extension Hunting
568 Feature Guide