Panasonic KX-TDA100 Features Manual page 586

4.10 Extension [4]
Programming Guide References
None
Feature Guide References
2.1.1 Extension Port Configuration
Telephone Type
Indicates the type of telephone connected to the extension port (reference only).
Default
Current connected telephone type
Value Range
DPT(T76xx): KX-T7600 series DPT is connected.
DPT(Other): DPT other than KX-T7600 series is connected.
APT: APT is connected.
DSS: DSS Console is connected.
VM: VPS is connected.
SLT: SLT is connected (or no telephone is connected to the Super Hybrid port).
ISDN-Extension: ISDN telephone is connected.
No Connection: No telephone is connected.
CS: CS is connected.
IP-EXT: IP-PT is connected.
Feature Guide References
None
Wireless XDP
Specifies the extension number of the PS with which the Wireless XDP Parallel Mode is established. To
enable the Wireless XDP Parallel Mode, the PS must be turned off once and then turned on after assigning
this setting.
When changing the port type of an extension port in DPT Property—Type (for DPT or S-Hybrid port) on
the 4.7.23 Extension Port [1-8] screen, the Wireless XDP setting must be deleted first.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9)
Programming Guide References
None
Feature Guide References
1.22.3 Wireless XDP Parallel Mode
586 Feature Guide