Private Network Features-Qsig-Ct (Call Transfer) - Panasonic KX-NS700 Feature Manual

It is possible for each extension to restrict the sending of its extension name to the QSIG network. When
CLIR is activated, CNIR becomes active automatically. When COLR is activated, CONR becomes active
automatically.
Conditions
•
COLP/CLIR/COLR/CNIP/CONP/CNIR/CONR Assignment for Each Port
Each service can be enabled or disabled on each ISDN (QSIG) port of the PBX.
•
CLIR Button and COLR Button
It is possible to switch between CLIP and CLIR by pressing the CLIR button, and COLP and COLR by
pressing the COLR button. A flexible button can be customized as the CLIR or COLR button.
PC Programming Manual References
9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port—Supplementary Service—
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, E911
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features
→COLR Set / Cancel
→CLIR Set / Cancel
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Main
→Extension Number
→Extension Name
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Main
→Extension Number
→Extension Name
PT Programming Manual References
[003] Extension Number
[004] Extension Name
Feature Manual References
7.1.3 Flexible Buttons
Operating Manual References
1.3.54 Private Network Features—CLIP (Calling Line Identification Presentation)
1.3.55 Private Network Features—CLIR (Calling Line Identification Restriction)
1.3.57 Private Network Features—COLR (Connected Line Identification Restriction)
15.1.22 Private Network Features—QSIG—CT (Call Transfer)
Description
The PBX transfers the call to a destination extension in another PBX in the QSIG network.
If the same trunk group is used for the incoming call and the transferred call, the following situation will be
possible.
Document Version 2017-06
15.1.22 Private Network Features—QSIG—CT (Call Transfer)
Feature Manual 301