Panasonic KX-TDA100 Features Manual page 419

Feature Guide References
None
CPC Detection (DID)—Outgoing, Incoming (for DID channel)
Specifies the length of time required by the PBX to detect a CPC signal on outgoing or incoming CO line
calls before disconnecting the line.
Default
160 ms
Value Range
None, 80 × n (n=2–75) ms
Feature Guide References
None
CPC Detection (LCO/GCO)—Outgoing, Incoming (for GCOT or LCOT
channel)
Specifies the length of time required by the PBX to detect a CPC signal on outgoing or incoming CO line
calls before disconnecting the line.
Default
160 ms
Value Range
None, 80 × n (n=2–75) ms
Feature Guide References
None
DTMF Width
Selects the length of the DTMF tone sent to the T1 channel.
Default
80 ms
Value Range
80 ms, 160 ms
Feature Guide References
None
CO Pulse Speed
Selects the speed at which pulse dials are sent to the T1 channel.
4.7 Configuration [1]
Feature Guide 419