Utility-T1 Signalling Bit Monitor - Panasonic KX-TDA100 Features Manual

4.5 Utility
Button
Major
Clear
The items displayed on screen are as follows:
Item
Index
Date
Time
Error Code
Sub Code
Error Message
Note
For a list of common errors and solutions, see "4.1.5 Troubleshooting by Error Log" of the Installation
Manual.
To view the error log
• From the Utility menu, select Error Log.
4.5.9 Utility—T1 Signalling Bit Monitor
Displays reference signalling bit information for all channels of the T1 card, by monitoring sent and received
A, B, C and D bits. This utility is intended for use by dealers.
This option is only available at Installer level, and requires that the target T1 card be set to INS status.
While monitoring is being performed, any displayed bits whose value changes from 0 to 1 or vice versa will
be highlighted in red until the next screen refresh is performed.
326 Feature Guide
Function
Displays major errors, which affect operation of the whole system,
or result in system failure.
Erases the stored error log information from both the screen and
the PBX.
Description
The ordinal number assigned to an error record in the current log.
The date of the error detection.
The time of the error detection.
The 3-digit error code assigned by the PBX.
The 5-digit sub code of the relevant hardware. (1XXYY)
1: Cabinet number
XX: Slot number
KX-TDA100: 00 to 06 (00: MPR slot; 01 to 05: Free slot; 06:
Option slot)
KX-TDA200: 00 to 11 (00: MPR slot; 01 to 10: Free slot; 11:
Option slot)
YY: Physical port number (01 to 16)
For OPB3 card, sub slot number + port number will be
displayed.
Sub slot 1: 11 to 14
Sub slot 2: 21 to 24
Sub slot 3: 31 to 34
A description of the error.