Standard Buttons; Card Status; Display Options - Panasonic KX-TDA100 Features Manual

4.1 Introduction
Help
Menu Option
Additional Information
About
4.1.4

Standard Buttons

There are several standard buttons that are displayed on many screens within the Maintenance Console.
The standard buttons are as follows:
Button
OK
Cancel
Apply
Help
4.1.5

Card Status

Certain tools, utilities and settings require that the target card be set to out-of-service (OUS) or in-service
(INS) status before the operation is carried out. Where required, this is noted in the description of each item.
"In service" means that the card is installed correctly in the PBX, and is capable of being used normally.
"Out of service" means that the card is installed correctly in the PBX, but has been temporarily removed
from use. This allows settings to be modified or software to be upgraded.
To change the status of a card
1.
Open the Configuration—Slot screen of the Maintenance Console (see "4.7.1 Slot [1-1]").
2.
Select the card command of the desired card:
• Click the desired cell in the Status column.
• Use the arrow keys to select the desired cell in the Status column, and then click Command.
3.
Select the desired status:
• Click INS to set the card to in-service status.
• Click OUS to set the card to out-of-service status.
4.1.6

Display Options

The View and Window menus provide options to control the display of items within the Maintenance
Console.
• View
– Toolbar: Displays or hides the toolbar of commonly used buttons.
304 Feature Guide
U
Function
Implements changes and closes the current screen.
Abandons changes and returns to the previous screen.
Implements changes and remains on the same screen.
Displays the relevant help topic for the current screen.
Initial Batch
A I U A I
Interactive
U A I