Panasonic KX-TDA100 Features Manual page 618

4.10 Extension [4]
Programming Guide References
4.10.1 Wired Extension—Extension Settings [4-1-1]
Feature Guide References
1.19.1.2 Calling Line Identification Presentation (CLIP)
Number to Generate
Specifies the number of locations to be programmed.
A CLIP number will only be assigned to connected wired extensions, even if the number entered here is
larger than the total number of wired extensions.
Default
24
Value Range
1–total number of connected wired extensions
Programming Guide References
4.10.1 Wired Extension—Extension Settings [4-1-1]
Feature Guide References
1.19.1.2 Calling Line Identification Presentation (CLIP)
Deleting Digits
Specifies the number of digits to be deleted from the start of an extension number when using it as part of
the CLIP number.
Default
0
Value Range
0–4
Programming Guide References
4.10.1 Wired Extension—Extension Settings [4-1-1]
Feature Guide References
1.19.1.2 Calling Line Identification Presentation (CLIP)
Head of ID
Specifies a prefix number to be applied to all generated CLIP numbers.
Default
Not stored
618 Feature Guide