Panasonic KX-TDA100 Features Manual page 418

4.7 Configuration [1]
Feature Guide References
1.19.1.2 Calling Line Identification Presentation (CLIP)
CO Dial Mode
Selects the type of signal used to dial out to a CO line.
Default
DTMF
Value Range
DTMF, Pulse
Feature Guide References
None
Channel Type
Selects the channel type.
Default
Undefined
Value Range
Undefined: Not assigned
GCOT: Ground Start Central Office
LCOT: Loop Start Central Office
DID: Direct Inward Dialing
TIE (E & M): TIE Line
OPX: Off Premise Extension
Programming Guide References
None
Feature Guide References
1.20.1 T1 Line Service
Trunk Property (for TIE channel)
Selects the trunk property of the TIE channel.
Default
Private
Value Range
Public: Use the DIL/DID method to distribute incoming CO line calls.
Private: Use the TIE line service between two or more PBXs.
418 Feature Guide