Panasonic KX-TDA100 Features Manual page 22

1.1 Incoming Call Features
In this example:
If a CO line call is received on CO line 01:
In day mode: Calling Line Identification (CLI) distribution is enabled. The call is routed to its CLI destination,
if assigned. If not assigned, the call is routed to the Direct In Line (DIL) destination, extension 101.
In lunch mode: CLI distribution is disabled. The call is routed to the DIL destination, extension 100.
Note
Tenant numbers and VPS trunk (CO line) group numbers (not shown here) can also be programmed
in the DIL Table.
The tenant number programmed here is used only to determine the Time Table used by each CO line;
selecting tenant 3 means the CO line will use Time Table 3, for example. The VPS trunk (CO line) group
number set here is used to determine the Incoming Call Service and greeting message used by the
Voice Processing System (VPS) during the current time mode. (→ 1.21.2 Voice Mail DPT (Digital)
Integration).
Conditions
• To use this feature, DIL must be assigned as the distribution method for the desired CO line port.
Feature References
1.1.1.4 Calling Line Identification (CLI) Distribution
2.2.4 Time Service
22 Feature Guide