To Set Next Copying Job (Reserve) - Konica Minolta 7020 Instruction Manual

Copying Using Memory (continued)
I To Set Next Copying Job (Reserve)
The Reserve function allows you to set up a new job
while a current (scan/print) job is in process. When the
current job is finished, the Reserve job starts printing
immediately.
Specifications for Reserve
❒ Job settings: Max. 5 (current job plus 4 reserve jobs)
❒ When the current job is under Store mode, Image
insert, or Dual page, the reserve job setting will be
available after the copier starts to print the current
job.
❒ Incompatible Conditions: Interrupt copying, Scan-
ning in Store mode, Proof copy
1
Press
START
for the current job.
RESERVE
will become active to show that the re-
serve job setting is now available.
2
Touch RESERVE to highlight it.
The Reserve Job Setting Screen will be displayed.
On the Reserve Job Setting Screen, all keys on
the LCD and control panel will function for the re-
serve job.
to start scanning/printing
3
Copying
Operations
Positioning
Originals
Setting
Print Quantity
Paper Size
Lens Mode
Density
1s2, 2s2
2s1
Using
Memory
Output without
Finisher
FS-107
Output Modes
IT-101
Output Modes
Check Mode
& Proof Copy
Interrupt
Mode
3-23