Making Double-Sided Copies (1 2, 2 2); M Aking Double-Sided Copies (1 2, 2 2); Using Radf; Output Without - Konica Minolta 7085 Instruction Manual

Making Double-Sided Copies (1 2, 2 2)

The Basic Screen is initially set to 1 1 copy mode to make single-sided copies from
single-sided originals.
Follow the procedure below to make double-sided copies from the originals scanned
from the document feeder or from the platen glass.

Using RADF

Select the copy mode according to the original type (single-sided or double-sided).
2-2 Copying
Double-sided original
1-2 Copying
1.
Touch 1 2 or 2 2 on the Basic Screen to highlight it.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
Front
Front
Front
Front
Front
Front Back
Front Back
Front Back
Front Back
Front Back
Single-sided original
Reminder!
Front
Front
Front
Front
Front
Duplex copy
Front
Front
Front
Front
Front
Duplex copy
3
C opying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Paper Size
Lens Mode
Density
1-2, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory

Output without

Finisher
FS-111/211
Output Modes
Binding
Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode
3-21