Making Double-Sided Copy (1S2, 2S2); Using Radf; Output Without Finisher - Konica Minolta 7020 Instruction Manual

Making Double-Sided Copy (1s2, 2s2)

The Basic Screen is initially set to 1s1 copy mode to make single-sided copies from
single-sided originals.
Follow the procedure below to make double-sided copies from the originals scanned
from the document feeder or from the platen glass.
I Using RADF
Select the copy mode according to the original type
(single-sided or double-sided).
2-2 Copying
Double-sided original
Single-sided originals
1
z x
Touch
sic Screen to highlight it.
2
Select additional copy conditions, as
desired.
Duplex copy
7020
7025
7030
7035
Series
Duplex copy
x x
or on the Ba-
1-2 Copying
Please Be Reminded! Please Be Reminded!
When starting a new copying
job, be sure to close the RADF
securely, then press
AUTO RESET
Some incompatible conditions
may automatically release the
selected copy mode.
In this case, arrange all the
settings to be compatible with
the selected copy mode.
3
Copying
Operations
Positioning
Originals
Setting
Print Quantity
Paper Size
Lens Mode
Density
1s2, 2s2
2s1
Using
Memory
Output without
Finisher
FS-107
Output Modes
IT-101
Output Modes
Check Mode
& Proof Copy
Interrupt
.
Mode
3-17