Selecting Magnification Ratio (Lens Mode); To Copy In 1.00 Magnification Mode - Konica Minolta 7020 Instruction Manual

Selecting Magnification Ratio (Lens Mode)

When the copier is turned ON, the magnification ratio is set to 1.00 (100%) automati-
cally on the Basic Screen.
Follow each procedure described in this section to select the desired magnification
ratio.
I To Copy in 1.00 Magnification Mode
Follow this procedure to make a 100% copy of the origi-
nal image.
1
Close the RADF securely, then press
.
AUTO RESET
The initial settings are restored. Check that
is highlighted to indicate that the 1.00 magnifica-
tion is selected.
2
Select additional copy conditions, as
desired.
3
Enter the desired print quantity from
the control panel keypad.
4
Position original(s).
5
Press
START
3-12
.
HINTS
The initial settings may have
been altered by Key operator.
See p. 12-6 to p. 12-12.
1.00
Specifying paper size will re-
lease 1.00 magnification and
set AMS ( –A– ) automati-
cally.
In this case, touch
highlight it again.
HINTS
See p. 3-7 for details on set-
ting print quantity.
HINTS
See p. 3-2 to p. 3-6 for details
on positioning originals.
1.00 to